ROHM has added New Lineup of 17 High-Performance Op Amps Enhancing Design Flexibility
Trade news

ROHM has added New Lineup of 17 High-Performance Op Amps Enhancing Design Flexibility

　　ROHM has added the new CMOS Operational Amplifier (op amp) series “TLRx728” and “BD728x” to its lineup. These are suitable for a wide range of applications including automotive, industrial, and consumer systems. A broad lineup also makes product selection easier.　　In recent years, demand for high-accuracy op amps has been rapidly increasing as automotive and industrial systems become more sophisticated, demanding faster speed, better precision, and higher efficiency. In applications requiring amplification of sensor outputs, minimizing signal error and delay is essential. To meet these requirements, a well-balanced set of key characteristics is needed, including Input Offset Voltage, Noise, and Slew Rate.　　These new products are high-performance op amps that offer a low input offset voltage, low noise, and high slew rate. TLRx728 features an input offset voltage of 150 μV (typ.), while the BD728x offers 1.6 mV (typ.). Both series have a noise voltage density of 12 nV/√Hz at 1kHz and a slew rate of 10 V/μs. They are therefore suitable for a wide range of precision applications, including sensor signal processing, current detection circuits, motor driver control, and power supply monitoring systems. Both series are designed to balance versatility and high performance rather than being limited to specific applications.　　Rail-to-Rail input/output capability allows maximum utilization of the power supply voltage range, ensuring a wide dynamic range.　　Furthermore, in addition to 1 channel, 2 channels, and 4 channels configurations, a diverse range of packages is available, enabling optimal product selection based on application and board size.　　The new products are being released simultaneously except for certain part numbers (Sample Price: 1-channel: $2.0, 2-channels: $2.8, 4-channels: $4.0 per unit, excluding tax).　　Application Examples　　Automotive equipment, industrial equipment, and consumer electronics.　　Example use case: Sensor signal processing, current detection circuits, motor driver control, power supply monitoring systems.　　Terminology　　Input Offset Voltage　　The voltage that must be applied between the op amp’s two input terminals to force the output to zero volts.　　Slew Rate　　A performance metric indicating how rapidly an op amp's output voltage can change while operating in linear region.　　Noise Voltage Density　　Also called noise spectral density. This is noise power per square root of bandwidth of 1 Hz. The total noise power within a bandwidth of B Hz is Noise Voltage Density x √B.
Key word：
Release time：2026-04-03 10:56 reading：276 Continue reading>>
SIMCom丨SIM8260 series Achieves Global Certifications, Delivering High-Performance 5G Connectivity
Trade news

SIMCom丨SIM8260 series Achieves Global Certifications, Delivering High-Performance 5G Connectivity

　　SIMCom, a global leader in IoT communication and solutions, proudly announces that its SIM8260 Series 5G modules have successfully obtained a wide range of international certifications, including CE, RCM, FCC, IC, JATE, TELEC, GCF, PTCRB, T-Mobile, Verizon, Deutsche Telekom, Orange, RoHS, REACH. These certifications demonstrate the SIM8230 series’ compliance with global standards and network requirements, ensuring smooth deployment across worldwide markets.　　Built on the Qualcomm® Snapdragon™ X62 chipset platform, the SIM8260 series are a multi-band 5G Release 16 module supporting NR, LTE-FDD, LTE-TDD, and HSPA+ in both NSA and SA modes. With its advanced capabilities, the SIM8260 series enable fast, stable, and secure mobile broadband connections for a wide range of industrial and commercial applications.　　The SIM8260 series achieve outstanding data rates across multiple network environments. On 5G Sub-6G SA, it supports download speeds of up to 2.4Gbps and upload speeds of up to 1Gbps, while in 5G Sub-6G NSA mode it can reach 3.4Gbps (DL) and 600Mbps (UL). For LTE networks, peak speeds of 1.6Gbps downlink and 200Mbps uplink are supported, and on HSPA+, the module achieves 42Mbps (DL) and 5.76Mbps (UL). These capabilities ensure stable, high-capacity communication to meet the demands of data-intensive IoT and enterprise applications.　　Beyond performance, the SIM8260 series offer robust expansion capabilities with a wide range of interfaces including PCIe, USB 3.1, and GPIO, enabling flexible integration into customer solutions, reduce development costs, and accelerate time-to-market.　　With its combination of high throughput, flexible integration, and proven security, the SIM8260 series are ideally suited for use cases such as smart manufacturing, connected vehicles, customer premises equipment (CPE), robotics, and other next-generation IoT solutions.　　The achievement of comprehensive global certifications underscores the SIM8260 series’ in large-scale international deployment. These approvals not only confirm compliance with stringent regulatory, safety, and environmental standards, but also guarantee broad operator interoperability across regions. For customers, this means accelerated product launches, reduced deployment risks, and greater confidence in global scalability.
Key word：
Release time：2026-01-23 16:51 reading：592 Continue reading>>
NOVOSENSE launches automotive- and industrial-grade NSCSA240-Q series current sense amplifiers to address PWM transient interference challenges
Trade news

NOVOSENSE launches automotive- and industrial-grade NSCSA240-Q series current sense amplifiers to address PWM transient interference challenges

　　NOVOSENSE announced the launch of its new bidirectional current sense amplifier series, NSCSA240-Q, covering both industrial and automotive versions, designed for high-voltage PWM systems in vehicles and industrial equipments. The NSCSA240-Q series integrates enhanced PWM rejection technology, supporting bidirectional current sensing with exceptional transient immunity, automotive-grade precision, and flexible configurability. Featuring an ultra-wide input common-mode range from –4V to 80V, a typical input offset voltage of ±5μV, and a 135dB DC Common-Mode Rejection Ratio (CMRR). This series effectively tackles the challenge of high-frequency transient interference in PWM systems, providing a highly reliable current monitoring solution for automotive electronic power steering (EPS), motor drive, industrial automation and other applications. The NSCSA240-Q series meets the AEC-Q100 automotive reliability standard.　　Superior Transient Immunity: Reliable Performance in High-Voltage PWM Environments　　In PWM systems, rapid switching can cause severe common-mode voltage fluctuations that distort output signals in conventional amplifiers. The NSCSA240-Q series achieves an AC CMRR of 90dB at 50kHz, effectively suppressing ΔV/Δt transients. Its proprietary transient suppression design reduces output disturbances by up to 80%, achieving a recovery time of less than 10μs under 80V common-mode voltage transients. With a bandwidth ranging from 450kHz to 600kHz (gain-dependent), it supports both high-speed overcurrent protection and accurate low-frequency PWM signal capture—ensuring stable, low-noise signal performance for EPS, motor drive and industrial motor control systems. The wide –4V to 80V input common-mode range offers broad dynamic capability and robust tolerance across 12V, 24V, and 48V vehicle power architectures. Furthermore, ±2000V ESD protection (HBM/CDM) enhances resistance to external electrical disturbances, ensuring overall system reliability.NSCSA240-Q Series Application Diagram　　Automotive-Grade Precision: ±5μV Offset and ±0.1% Accuracy Across –40°C to 125°C　　Designed to meet the increasingly stringent current measurement requirements of automotive electronics, the NSCSA240-Q series delivers exceptional measurement stability. It features a typical input offset voltage of only ±5μV (maximum ±25μV) and achieves ±0.1% accuracy over a wide temperature range (–40°C to 125°C). With a typical gain error of 0.05%, it ensures reliable and consistent current monitoring even under harsh conditions. Fully qualified to the AEC-Q100 automotive standard, the series guarantees long-term reliability in demanding in-vehicle environments.　　Flexible Integration: Multiple Gain and Package Options for Design Optimization　　As automotive systems trend toward miniaturization and integration, the NSCSA240-Q series is engineered for flexible and space-efficient design. It offers four fixed gain options—20V/V, 50V/V, 100V/V, and 200V/V—supporting shunt resistors ranging from 10mΩ to 0.1mΩ for flexible current detection. The series is available in two compact packages: SOIC-8 (4.9mm × 3.91mm) and TSSOP-8 (3mm × 4.4mm), allowing easy integration into space-constrained motor controller PCBs and helping designers optimize system layouts within limited board area.NSCSA240-Q Series Package
Key word：
Release time：2026-01-12 13:52 reading：1198 Continue reading>>
Renesas’ Industry-First Gen6 DDR5 Registered Clock Driver Sets Performance Benchmark by Delivering 9600 MT/s
Trade news

Renesas’ Industry-First Gen6 DDR5 Registered Clock Driver Sets Performance Benchmark by Delivering 9600 MT/s

　　Renesas Electronics Corporation (TSE: 6723), a premier supplier of advanced semiconductor solutions, today announced that it has delivered the industry’s first sixth-generation Registered Clock Driver (RCD) for DDR5 Registered Dual In-line Memory Modules (RDIMMs). The new RCD is the first to achieve a data rate of 9600 Mega Transfers Per Second (MT/s), surpassing the industry standard. This breakthrough marks a significant leap from the 8800 MT/s performance of Renesas’ Gen5 RCD, setting a new standard for memory interface performance in data center servers.　　Key Features of Renesas’ Gen6 DDR5 RCD　　10% Bandwidth Increase over Renesas’ Gen5 RCD (9600 MT/s versus 8800 MT/s)　　Backward Compatibility with Gen5 Platforms: Provides seamless upgrade path　　Enhanced Signal Integrity and Power Efficiency: Enables AI, HPC, and LLM workloads　　Expanded Decision Feedback Equalization Architecture: Offers eight taps and 1.5mV granularity for superior margin tuning　　Decision Engine Signal Telemetry and Margining (DESTM): Improved system-level diagnostics provides real-time signal quality indication, margin visibility, and diagnostic feedback for higher speeds　　The new DDR5 RDIMMs are needed to keep pace with the ever-increasing memory bandwidth demands of Artificial Intelligence (AI), High-Performance Compute (HPC) and other data center applications. Renesas has been instrumental in the design, development and deployment of the new RDIMMs, collaborating with industry leaders including CPU and memory providers, along with end customers. Renesas is the leader in DDR5 RCDs, building on its legacy of signal integrity and power optimization expertise.　　“Explosive growth of generative AI is fueling higher SoC core count. This is driving unprecedented demand for memory bandwidth and capacity as a critical enabler of data center performance,” said Sameer Kuppahalli, Vice President of Memory Interface Division at Renesas. “Our sixth generation DDR5 Registered Clock Driver demonstrates Renesas’ continued commitment to memory interface innovation, path-finding and delivering solutions to stay ahead of market demand.”　　"Samsung has collaborated with Renesas across multiple generations of memory interface components, including the successful qualification of Gen5 DDR5 RCD and PMIC5030,” said Indong Kim, VP of DRAM Product Planning, Samsung Electronics. “We are now excited to integrate Gen6 RCD into our DDR5 DIMMs, across multiple SoC platforms to support the growing demands of AI, HPC, and other memory-intensive workloads."　　Availability　　The RRG5006x Gen6 RCD is designed to meet the stringent requirements of next-generation server platforms, offering robust performance, reliability, and scalability. Renesas is sampling the new RRG5006x RCD to select customers today, including all major DRAM suppliers. Production availability is expected in the first half of 2027.
Key word：
Release time：2025-11-13 16:33 reading：1780 Continue reading>>
Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces
Trade news

Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces

　　Murata Manufacturing Co., Ltd. (hereinafter ‘Murata’) has added a high cutoff frequency*1 product to its lineup of noise suppression components, the 0504-inch size (1.25 x1.0mm) chip common mode choke coils ‘‘DLM11C_HH2 Series’’ (hereinafter, ‘the product’), suitable for automotive high-speed differential interfaces such as LVDS*2, SerDes*3, USB, and HDMI. Murata has already started mass production of this product.　　*1High cutoff frequency: Reduces high-frequency noise.　　*2LVDS (Low Voltage Differential Signaling): An interface used for LCD panels.　　*3SerDes (Serializer/Deserializer): Circuits that convert between the serial and parallel signals in each direction.　　In recent years, the automotive market has seen multiple USB ports installed in each vehicle seat as interfaces for connecting smartphones and PCs, and data transfer speeds have increased from conventional USB 2.0 to Gbps-class USB 3.2. For these differential interfaces, common mode noise suppression is essential, and small common mode choke coils that support high-speed signals are required. In response, Murata developed this product using proprietary lamination technology to reduce high-frequency noise above 7.5 GHz in a compact 0504-inch size.　　Specifications　　*4AEC-Q200: One of the standards defined by the Automotive Electronics Council (AEC).
Key word：
Release time：2025-11-10 17:12 reading：778 Continue reading>>
Renesas Adds Two New MCU Groups to Blazing Fast RA8 Series with 1GHz Performance and Embedded MRAM
Trade news

Renesas Adds Two New MCU Groups to Blazing Fast RA8 Series with 1GHz Performance and Embedded MRAM

　　Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today introduced the RA8M2 and RA8D2 microcontroller (MCU) groups. Based on a 1 GHz Arm® Cortex®-M85 processor with an optional 250 MHz Arm® Cortex®-M33 processor, the new MCUs are the latest Renesas offerings to deliver an unmatched 7300 Coremarks of raw compute performance, the industry benchmark for MCUs. The optional Cortex-M33 processor enables efficient system partitioning and task segregation.　　Both RA8D2 and RA8M2 devices are ultra-high performance MCUs as part of the second generation of the RA8 Series – the RA8M2 are general-purpose devices, and the RA8D2 MCUs are packed with a variety of high-end graphics peripherals. They are built on the same high-speed, low-power 22-nm ULL process used for the RA8P1 and RA8T2 devices introduced earlier this year. The devices include single and dual core options, and a specialized feature set to address the needs of a broad base of compute intensive applications. They take advantage of the high performance of the Arm Cortex-M85 processor and Arm’s Helium™ technology to offer a significant performance boost for digital signal processor (DSP) and machine learning (ML) implementations.　　The RA8M2 and RA8D2 devices offer embedded MRAM that has several advantages over Flash technology - high endurance & data retention, faster writes, no erase needed, and byte addressable with lower leakage and manufacturing costs. SIP options with 4 or 8 MB of external flash in a single package are also available for more demanding applications. Both the RA8M2 and RA8D2 MCUs include Gigabit Ethernet interfaces and a 2-port TSN switch to address industrial networking use cases.　　Both of the MCU Groups provide a combination of the high performance of the Cortex-M85 core, together with large memory and a rich peripheral set, making them particularly suitable for a wide range of IoT and industrial use cases. The lower power CM33 core can act as a housekeeping MCU, executing system tasks while the high performance CM85 core stays in sleep mode, to be woken up only as needed for high compute tasks, thus lowering the system power consumption.　　“The RA8M2 and RA8D2 complete Renesas’ new generation of RA8 MCUs, purpose-built for the high-performance microcontroller market,” said Daryl Khoo, Vice President of the Embedded Processing Marketing Division at Renesas. “This portfolio empowers Renesas to deliver scalable, secure and AI-enabled embedded processing solutions that accelerate customer innovation and time-to-market across a broad spectrum of industrial, IoT and select automotive applications. Renesas’ commitment to innovation is reflected in the RA8 Series’ ability to address complex processing requirements while maintaining lower power consumption and minimizing total cost of ownership to future-proof customers’ designs.”　　RA8D2 Feature Set Optimized for Graphics and HMI Applications　　The RA8D2 MCUs provide a plethora of features and functions for graphics and HMI applications:　　High resolution Graphics LCD Controller supports up to 1280x800 displays with both parallel RGB and 2-lane MIPI DSI interfaces　　Two-Dimensional Drawing Engine offloads the graphics rendering tasks from the CPU and supports graphics primitives　　Multiple camera interface options enable camera and vision AI applications,　　16-bit camera interface (CEU) with support for image data fetch, processing and format conversion　　MIPI CSI-2 interface offers a low pin-count interface with 2 lanes, each up to 720Mbps　　A VIN module performs vertical and horizontal scaling and format and color space conversions of YUV and RGB data inputs received from the MIPI CSI-2 interface　　Audio interfaces such as I2S and PDM support digital microphone inputs for audio and voice AI applications　　Comprehensive graphics solution with industry-leading embedded graphics GUI packages from SEGGER emWin and Microsoft GUIX, integrated into Renesas’ FSP　　Software JPEG decoder optimized for Helium, available with both emWin and GUIX solutions, allows decode of JPEG images with up to 27fps end-to-end graphics performance with Helium acceleration　　Multiple graphics ecosystem partners such as Embedded Wizard, Envox, LVGL and SquareLine Studio are offering solutions that employ RA8D2 using Helium to accelerate graphics functions and JPEG decoding　　Key Features of the RA8M2 and RA8D2 Group MCUs　　Core: 1 GHz Arm Cortex-M85 with Helium; Optional 250 MHz Arm Cortex-M33　　Memory: Integrated 1MB high-speed MRAM and 2MB SRAM (including 256KB TCM for the Cortex-M85 and 128KB TCM for the M33). 4MB and 8MB SIP devices coming soon.　　Analog Peripherals: Two 16-bit ADC with 23 analog channels, two 3-channel S/H, 2-channel 12-bit DAC, 4-channel high-speed comparators　　Communications Peripherals: Dual Gigabit Ethernet MAC with DMA, USB2.0 FS Host/Device/OTG, CAN2.0 (1Mbps)/CAN FD (8Mbps), I3C (12.5Mbps), I2C (1Mbps), SPI, SCI, Octal serial peripheral I/F　　Advanced Security: RSIP-E50D Cryptographic engine, robust secure boot with FSBL in immutable storage on-chip, secure debug, secure factory programming, DLM support, tamper protection, DPA/SPA protection,　　The new RA8M2 and RA8D2 Group MCUs are supported by Renesas’ Flexible Software Package (FSP). The FSP enables faster application development by providing all the infrastructure software needed, including multiple RTOS, BSP, peripheral drivers, middleware, connectivity, networking, and security stacks as well as reference software to build complex AI, motor control and cloud solutions. It allows customers to integrate their own legacy code and choice of RTOS (FreeRTOS and Azure RTOS) with FSP, thus providing full flexibility in application development. In addition, Zephyr support is now included. Using the FSP will ease migration of existing designs to the new RA8 Series devices.　　Winning Combinations　　Renesas has combined the new RA8 Group MCUs with numerous compatible devices from its portfolio to offer a wide array of Winning Combinations, including the Smart Glasses and Pet Camera Robot for the RA8M2, and both Ki Wireless Power Transceiver System (Tx) and Ki Wireless Power Receiver System (Rx) for the RA8D2. Winning Combinations are technically vetted system architectures from mutually compatible devices that work together seamlessly to bring an optimized, low-risk design for faster time to market. Renesas offers more than 400 Winning Combinations with a wide range of products from the Renesas portfolio to enable customers to speed up the design process and bring their products to market more quickly. 　　Availability　　The RA8M2 and RA8D2 Group MCUs are available now, along with the FSP software. The RA8M2 devices are available in 176-pin LQFP, 224-pin and 289-pin BGA packages. The RTK7EKA8M2S00001BE Evaluation Kit is also available. The RA8D2 MCUs are offered in 224-pin and 289-pin BGA packages. The RTK7EKA8D2S01001BE Evaluation Kit supports the RA8D2 devices.
Key word：
Release time：2025-10-30 15:45 reading：1411 Continue reading>>
New Renesas USB-C Power Solution with Innovative Three-Level Topology Improves Performance and Reduces System Size
Trade news

New Renesas USB-C Power Solution with Innovative Three-Level Topology Improves Performance and Reduces System Size

　　Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today introduced the RAA489300/RAA489301 high-performance buck controller designed with a three-level buck topology used for battery charging and voltage regulation in USB-C systems such as multiple-port USB-PD chargers, portable power stations, PC docking station, robots, drones, and other applications that need a high efficiency DC/DC controller.　　The three-level buck converter topology enabled by the new IC delivers exceptional efficiency and significantly reduces the required inductance for regulating the output voltage. Its innovative design minimizes power loss and reduces system size, making it ideal for compact, high-performance applications.　　The three-level topology consists of two additional switches and a flying capacitor compared to a conventional two-level buck converter. The flying capacitor reduces voltage stress on the switches, allowing designers to use lower voltage FETs with better figures of merit. The result is reduced conduction and switching losses. This topology also enables the use of a smaller inductor with peak-to-peak ripple of only about 25 percent of that of a two-level converter, enabling reduced inductor core and direct current resistance losses.　　Renesas is a worldwide leader in USB-PD solutions, offering a comprehensive range of products, including turnkey solutions for various applications. Renesas helps customers shorten their time-to-market with an extensive development environment and pre-certified USB-IF reference designs. Renesas USB-PD solutions offer superior quality and safety, along with high efficiency and power density.　　“This three-level buck topology solution is a prime example of Renesas’ worldwide leadership in battery charging,” said Gaurang Shah, Vice President of the Power Division at Renesas. “The innovative technology includes patent-pending breakthroughs that offer our customers clear advantages over competing USB-C power offerings.”　　The 3-Level DC-DC RAA489300/RAA489301 battery charger and voltage regulator offers superior thermal performance, which reduces cooling requirements and results in cost and space savings. This innovative approach addresses the growing demand for compact and efficient power management systems.　　Key Features of the RAA489300/RAA489301 battery charger and voltage regulator　　Wide range of input and output voltages for use in voltage battery packs and with various PD adapters　　Integrated safety features with built-in protection mechanisms against overcharging, overheating, and voltage anomalies　　Scalability for easily adapting to various power levels and application requirements　　Optimized switching architecture divides the voltage across power switches, improving efficiency　　Minimizes power consumption, contributing to greener, more sustainable designs　　Lower thermal stress improves system reliability and extends product lifespan　　Winning Combinations　　Renesas offers the RTK-251-SinkCharger-240W and the 240W Dual-Port Daughter Card Winning Combinations that minimize the effort required for customers to design USB-C battery charging into their products. Winning Combinations are technically vetted system architectures from mutually compatible devices that work together seamlessly to bring an optimized, low-risk design for faster time to market. Renesas offers more than 400 Winning Combinations with a wide range of products from the Renesas portfolio to enable customers to speed up the design process and bring their products to market more quickly. 　　Device Availability　　The RAA489300/RAA489301 is available today in a 4×4 mm 32-lead TQFN package. Comprehensive design support and tools, including the RTK-251-SinkCharger-240W Kit and the RTKA489300DE0000BU Evaluation Board, are also available.
Key word：
Release time：2025-08-20 11:46 reading：1531 Continue reading>>
Renesas Introduces 64-bit RZ/G3E MPU for High-Performance HMI Systems Requiring AI Acceleration and Edge Computing
Trade news

Renesas Introduces 64-bit RZ/G3E MPU for High-Performance HMI Systems Requiring AI Acceleration and Edge Computing

　　Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, announced the launch of its new 64-bit RZ/G3E microprocessor (MPU), a general-purpose device optimized for high-performance Human Machine Interface (HMI) applications. Combining a quad-core Arm® Cortex®-A55 running at up to 1.8GHz with a Neural Processing Unit (NPU), the RZ/G3E brings high-performance edge computing with AI inference for faster, more efficient local processing. With Full HD graphics support and high-speed connectivity, the MPU targets HMI systems for industrial and consumer segments including factory equipment, medical monitors, retail terminals and building automation.　　High-Performance Edge Computing and HMI Capabilities　　At the heart of the RZ/G3E is a quad-core Arm Cortex-A55, a Cortex-M33 core, and the Ethos™-U55 NPU for AI tasks. This architecture efficiently runs AI applications such as image classification, object recognition, voice recognition and anomaly detection while minimizing CPU load. Designed for HMI applications, it delivers smooth Full HD (1920x1080) video at 60fps on two independent displays, with output interfaces including LVDS (dual-link), MIPI-DSI, and parallel RGB. A MIPI-CSI camera interface is also available for video input and sensing applications.　　“The RZ/G3E builds on the proven performance of the RZ/G series with the addition of an NPU to support AI processing,” said Daryl Khoo, Vice President of Embedded Processing at Renesas. “By using the same Ethos-U55 NPU as our recently announced RA8P1 microcontroller, we’re expanding our AI embedded processor portfolio and offering a scalable path forward for AI development. These advancements address the demands of next-generation HMI applications across vision, voice and real-time analytics with powerful AI capabilities.”　　The RZ/G3E is equipped with a range of high-speed communication interfaces essential for edge devices. These include PCI Express 3.0 (2 lanes) for up to 8Gbps, USB 3.2 Gen2 for fast 10Gbps data transfer, and dual-channel Gigabit Ethernet for seamless connectivity with cloud services, storage, and 5G modules.　　Low-Power Standby with Fast Linux Resume　　Starting with the third-generation RZ/G3S, the RZ/G series includes advanced power management features to significantly reduce standby power. The RZ/G3E maintains sub-CPU operation and peripheral functions while achieving low power consumption around 50mW and around 1mW in deep standby mode. It supports DDR self-refresh mode to retain memory data, enabling quick wake-up from deep standby for running Linux applications.　　Comprehensive Linux Software Support　　Renesas continues to offer the Verified Linux Package (VLP) based on the reliable Civil Infrastructure Platform, with over 10 years of maintenance support. For users requiring the latest versions, Renesas provides Linux BSP Plus, including support for the latest LTS Linux kernel and Yocto. Ubuntu by Canonical and Debian open-source OS are also available for server or desktop Linux environments.　　Key Features of RZ/G3E　　CPU: Quad-core Cortex-A55 (up to 1.8GHz), Cortex-M33　　NPU: Ethos-U55 (512 GOPS)　　HMI: Dual Full HD output, MIPI-DSI / Dual-link LVDS / Parallel RGB, 3D graphics, H.264/H.265 codec　　Memory Interface: 32-bit LPDDR4/LPDDR4X with ECC　　Connectivity for 5G Communication: PCIe 3.0 (2 lanes), USB 3.2 Gen2, USB 2.0 x2, Gigabit Ethernet x2, CAN-FD　　Operating Temperature: -40°C to 125°C　　Package Options: 15mm square 529-pin FCBGA, 21mm square 625-pin FCBGA　　Product Longevity: 15-year supply under Product Longevity Program (PLP)　　System-on-Module Solutions from Renesas and Ecosystem Partners　　Renesas has also introduced system-on-module (SoM) solutions featuring the RZ/G3E. A broad range of SoM solutions will be available from Renesas’ ecosystem partners such as a SMARC module from Tria, an OSM (Size-M) from ARIES Embedded, and an OSM (Size-L) from MXT.　　Winning Combinations　　Renesas combined the RZ/G3E with other compatible devices to develop Full HD Dual-Display HMI Platform and Digital Otoscope solutions. These Winning Combinations are technically vetted system architectures from mutually compatible devices that work together seamlessly to bring an optimized, low-risk design for faster time to market. Renesas offers more than 400 Winning Combinations with a wide range of products from the Renesas portfolio to enable customers to speed up the design process and bring their products to market more quickly. They can be found at renesas.com/win.　　Availability　　The RZ/G3E is available today, along with the Evaluation Board Kit. The kit includes a SMARC v2.1.1 module board and a carrier board.If you want to buy related products, you can contact AMEYA360's customer service.
Key word：
Release time：2025-07-30 15:09 reading：1371 Continue reading>>
NOVOSENSE Launches High-Performance 2-Wire Hall Switch MT72xx Series: Compact Design with System-Level Reliability
Trade news

NOVOSENSE Launches High-Performance 2-Wire Hall Switch MT72xx Series: Compact Design with System-Level Reliability

　　NOVOSENSE Microelectronics ("NOVOSENSE") has launched the MT72xx series, 2-wire current output Hall switches. The switches feature superior EMC performance, multiple sensing polarity options, and highly integrated design, achieving ASIL-A functional safety certification and full compliance with AEC-Q100 Grade 0 standards. Designed for long-wiring scenarios in vehicle body electronics and domain controller systems, the MT72xx series provides optimized solutions for seatbelt buckle detection, window lift motor control, and other automotive applications.　　Addressing Long Wiring Harness Challenges in Automotive　　With rapid advancement of automotive intelligence and electrification, increasingly complex vehicle body functions and highly integrated domain controllers have significantly extended wiring harnesses between sensors and control units. This introduces critical challenges including elevated signal interference risks, increased costs, and compromised system reliability.　　NOVOSENSE's MT72xx series delivers robust signal integrity while effectively reducing wiring complexity and lowering harness costs. Designed for long-wiring scenarios such as door lock detection, anti-pinch window control, power tailgate position sensing, seat adjustment, and seatbelt buckle detection, these devices provide stable current output with superior anti-interference capabilities, maintaining signal reliability even in extended wiring conditions.　　High Integration & Robustness for Automotive-Grade Standards　　Engineered for harsh automotive environments with strong EMI interference, the MT72xx series integrates a 100nF(only TO92S package)capacitor to enhance EMC/ESD performance, simplify peripheral configuration, and optimize BOM space, enabling flexible system architecture design. Compliant with AEC-Q100 Grade 0, the devices ensure long-term stability under extreme high-temperature conditions.　　Featuring multiple sensing polarity options (unipolar, omnipolar, latch) and adjustable sensitivity thresholds, the MT72xx series offers design flexibility to accommodate diverse magnet solutions and vehicle architectures, streamlining development and debugging processes.　　Comprehensive Resources to Accelerate Time-to-Market　　To expedite customer development, NOVOSENSEN provides dedicated MT72xx demo boards and magnetic simulation services. These resources enable rapid device validation, magnet solution matching, and cost-effective debugging, significantly shortening product deployment cycles.
Key word：
Release time：2025-07-14 14:25 reading：1466 Continue reading>>
GigaDevice GD32C231 Series MCU — Redefining Cost-Performance, Unleashing New Potential
Trade news

GigaDevice GD32C231 Series MCU — Redefining Cost-Performance, Unleashing New Potential

　　GigaDevice, a leading semiconductor company specializing in Flash memory, 32-bit microcontrollers (MCUs), sensors, and analog products, today officially launched the value-packed GD32C231 series of entry-level microcontrollers, further expanding its Arm® Cortex®-M23 core product lineup. As the leader in China's largest Arm® MCU market, GigaDevice positions the GD32C231 series as a "high-performance entry-level" solution designed to offer more competitive options for applications including small home appliances, BMS (Battery Management Systems), small-screen display devices, handheld consumer products, industrial auxiliary controls, and automotive aftermarket systems.　　With over 2 billion cumulative MCU shipments and a mature supply chain, GigaDevice's newly launched GD32C231 series overcomes the performance limitations of traditional entry-level chips through innovative design. The series not only integrates a rich set of peripherals but also adopts an industrial-grade wide-voltage process and offers a comprehensive ecosystem. While maintaining exceptional cost-effectiveness, this affordable MCU supports more complex application scenarios, redefining value standards in the entry-level MCU market and ushering in a new era of "affordable yet high-spec" solutions.　　GD32C231 Series MCUs: The Ultimate Choice for Cost-Effectiveness　　The GD32C231 series MCUs deliver a significant upgrade in computing performance and peripheral features while maintaining excellent price competitiveness, achieving an ultra-high cost-performance balance. Built on Arm's advanced Cortex®-M23 core architecture, the series offers up to 10% higher performance than Cortex®-M0+, with clock speeds reaching 48MHz. It supports efficient processing capabilities such as integer division, greatly enhancing software execution efficiency.　　In terms of memory configuration, the series features 32KB to 64KB of highly reliable embedded Flash and 12KB of low-power SRAM, with full memory areas equipped with ECC error correction. To meet the demands of diverse applications, multiple package options are available, including TSSOP20/LGA20, QFN28, LQFP32/QFN32, and LQFP48/QFN48. Thanks to its highly integrated chip design, the series effectively reduces the number of external components, providing users with a bill-of-materials (BOM) cost-optimized solution.　　The Perfect Balance of Wide Voltage Support, Low Power, and Fast Wake-up Time　　The GD32C231 series delivers exceptional power flexibility and energy efficiency, supporting a wide operating voltage range from 1.8V to 5.5V and a broad temperature range from -40°C to 105°C. This makes it highly adaptable for deployment in harsh and demanding environments. Featuring multiple power management modes, the device consumes as little as 5μA in deep sleep mode and offers ultra-fast 2.6μs wake-up time - achieving an optimal balance between low power consumption and real-time performance. These capabilities make the GD32C231 ideal for battery-powered and portable applications.　　Reliable Operation for Safety-Critical Applications　　Engineered for reliability, the GD32C231 provides robust ESD protection - meeting 8kV contact discharge and 15kV air discharge standards. Full ECC error correction is applied across Flash and SRAM memory, helping to prevent data corruption. An integrated hardware CRC module further enhances data transmission integrity. These features ensure the MCU performs reliably in safety-critical environments such as industrial automation and automotive electronics.　　Highly Integrated Peripherals for Flexible Design　　The GD32C231 series integrates a comprehensive set of peripherals, significantly enhancing system integration and design flexibility:　　A 12-bit ADC with 13 external channels and 2 internal comparators for precise analog signal measurement.　　Up to 4 general-purpose 16-bit timers and 1 advanced 16-bit timer for versatile time-based operations.　　2 high-speed SPI interfaces (including quad QSPI at 24Mbps), 2 I²C interfaces (supporting Fast Mode+ at 1Mbit/s), and 3 UARTs (up to 6Mbps) for robust serial communication.　　An integrated 3-channel DMA controller and 1 I²S interface for efficient peripheral data handling.　　With support for up to 45 GPIOs in a 48-pin package, the GD32C231 offers excellent expandability for complex designs. These rich peripheral resources empower the MCU to meet the demands of a wide range of applications - from consumer electronics to industrial control systems - with ease and reliability.　　Full-Stack Ecosystem Support for Efficient Development　　The GD32C231 series is backed by a comprehensive development ecosystem designed to accelerate product design and time-to-market. Standard software libraries and resources are readily available on GigaDevice's official website.　　To support developers throughout the entire development cycle, GigaDevice provides extensive documentation, including datasheets, user manuals, hardware design guidelines, application notes, and porting references - enabling rapid onboarding for both hardware and software development. A complete SDK firmware package is also offered, featuring rich sample code and development board resources that cover everything from low-level drivers to advanced applications.　　The GD32 MCU family natively supports FreeRTOS, offering developers a lightweight, open-source, and high-efficiency real-time operating system. To streamline development even further, GigaDevice offers the GD32 Embedded Builder IDE - its proprietary development environment that integrates graphical configuration and intelligent code generation, reducing design complexity. The GD32 All-In-One Programmer supports essential Flash operations such as programming, erasing, reading, and option byte configuration. Meanwhile, the GD-Link debugger provides dual-mode SWD/JTAG support with plug-and-play functionality for a seamless debugging experience. GigaDevice also collaborates closely with third-party programming tool providers to offer customers a wide range of programming and debugging options.　　Additionally, the GD32C231 series is fully compatible with major international toolchains including Arm® Keil, IAR Embedded Workbench, and SEGGER Embedded Studio, ensuring flexibility across various development platforms. For typical use cases, GigaDevice provides robust application solutions and reference designs - helping developers shorten design cycles, simplify product validation, and accelerate the path to mass production.
Key word：
Release time：2025-07-10 14:22 reading：1618 Continue reading>>

Turn to

/ 9

Popular categories
Semiconductors Circuit Protection Electromechanical Embedded Solutions Connectors, Interconnects Sensors, Transducers Optoelectronics Development Kits Test and Measurement Power Fans, Thermal Management Boxes, Enclosures, Racks Cables, Wires Passive Components Others
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
MC33074DR2G onsemi
BD71847AMWV-E2 ROHM Semiconductor
RB751G-40T2R ROHM Semiconductor
TL431ACLPR Texas Instruments
CDZVT2R20B ROHM Semiconductor
model brand To snap up
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
BP3621 ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
STM32F429IGT6 STMicroelectronics
ESR03EZPJ151 ROHM Semiconductor
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
Original authorized brand
More Licensed Brands>>
Information leaderboard
  • Week of ranking
  • Month ranking

About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below：

verification code